Obtaining Hardware Information; Fru Properties Dialog Box - HP Surestore 64 - Director Switch User Manual

6. Power supply failure indicator: When a blinking red and yellow diamond displays on a
power supply with the amber Fault indicator illuminated, that power supply has failed.
The tandem power supply has taken over to supply DC voltage to the director.
A green indicator displays and no alert symbols appear if the power supply is working,
as shown on the left (position 1) in the illustration.
7. Cooling fan module failure indicator: When a blinking red and yellow diamond ( )
displays on a fan module with the amber LED indicator illuminated, the module has
failed or is rotating insufficiently.
8. SBAR card beaconing indicator: The yellow triangle alert symbol ( ) displaying on the
SBAR card with the amber LED illuminated indicates that beaconing has been enabled.
9. SBAR failure indicator: The blinking red and yellow diamond ( ) displaying on the
SBAR card with the amber LED illuminated indicates a card failure.

Obtaining Hardware Information

This section explains how to access the FRU Properties, Port Properties, and Director
Properties dialog boxes.
Displaying FRU Information
Click a CTP card, power supply, cooling fan module, or SBAR card in the Hardware View to
display a FRU Properties dialog box. This dialog box displays the FRU name, slot position
relative to identical FRUs installed in the chassis, active or failed state, beaconing state
(CTP card, fan module, SBAR card) part number, and serial number.
Figure 17

FRU Properties Dialog Box

56 Hardware View