5.
The following MIB files can be loaded in any sequence.
LEFTHAND-NETWORKS-NSM-CLUSTERING-MIB
LEFTHAND-NETWORKS-NSM-DNS-MIB
LEFTHAND-NETWORKS-NSM-INFO-MIB
LEFTHAND-NETWORKS-NSM-NETWORK-MIB
LEFTHAND-NETWORKS-NSM-NOTIFICATION-MIB
LEFTHAND-NETWORKS-NSM-NTP-MIB
LEFTHAND-NETWORKS-NSM-SECURITY-MIB
LEFTHAND-NETWORKS-NSM-STATUS-MIB
LEFTHAND-NETWORKS-NSM-STORAGE-MIB
The supported MIBs
The following are the supported standard MIBs, though not every function in each MIB is supported.
•
DISMAN-EVENT-MIB
•
HOST-RESOURCES-MIB
•
IF-MIB
•
IP-FORWARD-MIB
•
IP-MIB
•
NET-SNMP-AGENT-MIB
•
NET-SNMP-EXTEND-MIB
•
NETWORK-SERVICES-MIB
•
NOTIFICATION-LOG-MIB
•
RFC1213-MIB
•
SNMP-TARGET-MIB
•
SNMP-VIEW-BASED-ACM-MIB
•
SNMPv2-MIB
•
UCD-DLMOD-MIB
•
UCD-SNMP-MIB
Using hardware information reports
The Diagnostics category, found in the tree under every storage system, includes multiple types of
information and reporting capabilities. Review the Hardware Information report of system statistics,
hardware, and configuration information.
Use the Diagnostics category to:
•
Run hardware diagnostics. See
•
View storage system hardware information in real-time. See
port" on page 138.
•
View and save a storage system's log files. See
•
View and save log files to a remote computer. See
files" on page 141.
"Running diagnostic
reports" on page 136.
"Saving log
"Using hardware information log
"Using the hardware information re-
files" on page 141.
P4000 SAN Solution user guide
135