Installing The Acu On Your Windows Management Server (Optional) - HP StorageWorks Modular Smart Array 1500 cs Installation Manual

Installing the ACU on your Windows management server
(optional)
If you plan to use the ACU to configure the MSA1500 cs, perform the following
steps to install it on the server(s) that you have designated for management tasks:
Note:
access to the MSA1500 cs.
1. Insert the MSA1500 cs Support Software CD into the CD-ROM drive of the
2. Read and accept the license agreement.
3. Click Install Array Configuration Utility.
4. Click Exit and remove the MSA1500 cs Support Software CD from the
5. Start the ACU and enter basic settings:
Note:
Array Configuration Utility User Guide
Modular Smart Array 1500 cs Installation Guide
In multi-path configurations, you must install the ACU on each server with
server and let it auto-start the installation program.
Follow the onscreen instructions to complete the installation.
After the files have been copied, a completion message is displayed.
CD-ROM drive.
a. From the desktop, click Start > Programs > HP System Tools >hp
Array Configuration Utility > Set up hp Array Configuration Utility.
The browser-based Management Setup Wizard is opened.
b. Click Next and follow the onscreen instructions to set:
— Administrator, Operator, and User passwords
— Device Trust Mode
— Remote Access
— Execution Mode
To use the ACU to configure your storage, refer to ACU online help or the
Configuration Procedures - Windows Environments
.
HP
61