Audit Log Transfer Window - HP XP20000/XP24000 User Manual

Item
Location Identification Name
Output Detailed Information
Download Syslog
Apply button
Cancel button

Audit Log Transfer Window

A storage administrator uses this window to configure FTP servers and manually transfer the audit
log file to the FTP servers. The Audit Log Administrator role needs to be set to Modify for that storage
administrator's user account. If the Audit Log Administrator role is set to View, the storage
administrator can view the Audit Log Transfer window, but not change settings or manually transfer
the audit log file to the FTP servers.
A SIM occurs to notify a storage administrator of the failure of an FTP transfer. This can occur when
the audit log file is not successfully transferred to any FTP server due to the failures of either the
FTP server or LAN. You can view the SIM in the Alerts window. The reference code for a failed
FTP transfer is 7C0300. If a SIM occurs, do the following:
Resolve the error condition on the FTP server or LAN, and then manually transfer the audit log
file by clicking Transfer in the Audit Log Transfer window. After that, complete the SIM in the
Audit Log Transfer window.
If the error condition cannot be resolved, download the audit log file to the Remote Web
Console computer by clicking Audit:Warning or Audit:Wraparound in the Remote Web Console
main window.
To open the Audit Log Transfer window, log in to Remote Web Console, and then select Go,
Security and Audit Log Transfer from the menu bar of the Remote Web Console main window.
Storage partition administrators cannot display the Audit Log Transfer window.
74 Using the Remote Web Console GUI
Description
Name, as you like, the storage system that transfers the audit log to syslog servers so
that you can identify the storage system. Enter 32 one-byte characters at the maximum.
Available characters are alphabetic (A-Z and a-z), numeric (0-9), and symbols (! " # $
% & ' ( ) = - ~ ^ | \ { } [ ] @ ` : ; * + _ ? / < > .). However, a comma (,) and a space
cannot be used.
Set whether to transfer the detailed information for the audit log file to the syslog server.
To transfer the detailed information to the syslog server, select Enable. If you do not,
select Disable. In the syslog file that is stored in the SVP, the detailed information is always
stored, regardless of this setting.
Downloads the syslog file to the web console client computer.
Implements all the settings. This button is available only in Modify mode.
Cancels all the settings. This button is available only in Modify mode.