Figure 20
Configure Date and Time Periodic Synchronization Dialog Box
2. Perform one of the following steps:
– To immediately synchronize the director date and time with the HP EFC server, be
sure the Periodic Date/Time Synchronization option is enabled and then click the
Sync Now button.
If you enable the Periodic Date/Time Synchronization feature and click Activate,
the time will synchronize at the next update period.
– To set the director with a specific date and time, make sure that the Periodic Date/
Time Synchronization field is not selected. Refer to Figure 21. Enter the date and
time, and then click Activate.
Figure 21
Configure Date and Time (Manually)
Use the range of 0 to 23 for hours. Use the range of 0 to 59 for minutes and seconds.
Hardware View
61