And Press _]Enter - Yamaha RX-V667 Owner's Manual

DON SCREEN
_ Cursor _/_7 /<1/F>
_]ENTER
Adjusts sound quality of tone using a parametric
equalizer.
PEQSelect
Select an equalizer type.
Manually adjust equalizer sound.
Adjust individual speakers to achieve the
same characteristics. Select this option if
speakers offer the same quality.
Adjust individual speakers to achieve the
same characteristics as the front left and
right speakers. Select this option if front
left and right speakers offer significantly
greater quality than other speakers.
Adjust all speakers to achieve a natural
sound. Select this if high-frequency
sounds seem too strong when "PEQ
Select" is set to "Flat."
Disable the equalizer.
PEQ Data Copy
Select 1 of the 3 parametric equalizer types acquired with
automatic setup and manually copy that information to the
manual
adjustments.
Copy the "Flat" parametric equalizer
information acquired with automatic
setup.
Copy the "Front" parametric equalizer
information acquired with automatic
setup.
Copy the "Natural" parametric equalizer
information acquired with automatic
setup.
Front L / Front R / Center/ Surround L / Surround R /
Surround Back L / Surround Back R / Front Presence L /
Front Presence R
The parametric equalizer can be used to manually adjust
sound quality for individual speakers.
Set "PEQ Select" to "Manual" and use "PEQ Data
Copy" to copy information acquired with automatic
setup. This information can be used as a basis for
performing manual adjustments.
Use _Cursor _ / _ repeatedly to select
"Band / Gain," "Freq. / Gain," or "Q / Gain"
and press _]ENTER.
Use _Cursor <1/ > repeatedly to adjust the
parameter and use [_Cursor _ /
repeatedly to adjust the gain.
Press _]ENTER to exit the edit window.
Repeat steps 1 to 3 to configure other
parameters.
To reset all parameter settings for the selected
speaker, select "Reset to Flat" and press _IENTER.
_f_ Press DON SCREEN to close the menu.
5
Turns the test tone generator on or off.
Does not generate test tones.
Generates test tones. While "On" is
selected, test tones are produced
constantly.
You can use the test tone in a variety of circumstances.
For example, you can adjust the volume balance
settings for each speaker, or whenever you adjust the
settings on the internal parametric equalizer, you can
listen to the actual effect while operating this unit.
Turn the test tone off when you have finished making
adj ustments.
En
87