Yamaha RX-V667 Owner's Manual page 70

%
You can connect a Yamaha Bluetooth wireless audio receiver (such as the YBA-10, sold separately) to this unit and enjoy wireless playback from Bluetooth-compatible
portable music players. _
NOTE
When playing back from a Bluetooth component for the first time, you must first pair the devices (register the Bluetooth components). When establishing a wireless connection
you must carry out pairing on both this unit and on the Bluetooth component.
gonnecfiW a Yamaha8fuetooth
wfrefess audfo mcefver
Use the dedicated cable to connect the dock to the
DOCK jack on the rear panel of this unit.
The Bluetooth wireless audio receiver connection will be
complete when this unit is turned on.
Yamaha Bluetooth
wireless audio receiver
Pairing 81uetooth components
Be sure to carry out pairing when connecting a Bluetooth
comlxment forthe first time, or when settingshave been deleted.
Refer to the operating instructions of your Bluetooth
component as necessary when carrying out pairing.
The Yamaha Bluetooth wireless audio receiver can be
paired with up to eight Bluetooth components. When
the ninth device is paired, the pairing settings for the
device which has not been used for the longest period
of time will be deleted.
Press _DOCK to switch to the DOCK input.
Turn on the Bluetooth component you want
to pair with and set it to pairing mode.
Press _OPT_ON to display the OPTION
menu and use _]Cursor _ / _7to select
"Pairing."
Press _]ENTER to start pairing.
• To cancel pairing, press _]RETUF{N.
• You can also press and hold _MEMORY on the front
panel to begin pairing.
[] DOCK
MEMORY
_ ENTEF{
RETUF_N
OPTION
CAUTION
To prevent accidents, switch this unit to standby mode
before connecting a Bluetooth wireless audio receiver.
"{bJ _ : This unil supports A2DP (Advanced Audio Distribulion Profile)
ol lhe Bhletooth prolile.
En
70