Yamaha RX-V667 Owner's Manual page 82

Adjusts the volume of the front presence R channel. _5<_
110to,00
Parameters usable in surround decoder
Selects a surround decoder.
Reproduces sound using the Dolby Pro Logic
decoder. This is suitable t_r all kinds of audio sources.
Reproduces sound using the Dolby Pro Logic IIx (or
Dolby Pro Logic II) decoder. This is suitable t_r
movies. _2
Reproduces sound using the Dolby Pro Logic IIx (or
Dolby Pro Logic II) decoder. This is suitable t_r
nmsic. _2
Reproduces sound using the Dolby Pro Logic IIx (or
Dolby Pro Logic II) decoder. This is suitable t_r
games. _2
Reproduces sound using the DTS Neo:6 decoder. This
is suitable for movies.
Reproduces sound using the DTS Neo:6 decoder. This
is suitable for music.
Dolby PLIIx Music and Dolby PLII Music only
Adjusts the soundscape of the front sound field. Sends front left/
right channels sounds to the surround speakers as well as the front
speakers for a wraparound effect.
Spreads the center channel sound to the front left and right
speakers to suit your needs or preferences. Set this parameter to 0
for outputting the center sound from the center speaker only, or to 7
for outputting it from the front left/right speaker only.
@
ll0to
Adjusts the difference in level between the front sound field and
the surround sound field. You can adjust the difference in level
created by the software being played back to obtain the preferred
sound balance.
The surround sound gets stronger as you make the value more
negative, and the front sound gets stronger as you make the value
more positive.
! , ii!i /10
When Neo:6 Music is selected
Adjusts the front left and right channel output relative to the center
channel to make the center channel more or less dominant as
necessary.
ll00to, 0
03
"{5_ "/ : Not displayed when speakers are set to be inactive.
"{bJ 2 : You cannot select the Dolby Pro Logic llx decoder in the following conditions:
• When "Surround Back" is set to "None" (_-_p. 85).
• When headphones are connected.
En
82