Yamaha RX-V667 Owner's Manual page 94

Sets the TRIGGER OUT jack to function synchronized with power
status of each zone or input switching.
Trigger Mode
Specify the condition for the TRIGGER OUT jack to function.
The TRIGGER
OUT jack functions
synchronized
with the power status of the zone specified with
"Target Zone."
The TRIGGER OUT jack functions synchronized
with the input switching in the zone specified with
"Target Zone."
Electronic signal is transmitted according to the
setting made in "Target Source."
Select this to manually switch the output level for
electronic signal transmission with "Manual."
Target Zone
Specify the zone with which the TRIGGER OUT jack functions
synchronized.
When "Trigger Mode" is set to "Power," electronic
signal transmission is synchronized with power status
of the main zone.
When "Trigger Mode" is set to "Source," electronic
signal transmission is synchronized with input
switching in the main zone.
When "Trigger Mode" is set to "Power," electronic
signal transmission is synchronized with power status
of Zone2.
When "Trigger Mode" is set to "Source," electronic
signal transmission is synchronized with input
switching in Zone2.
When "Trigger Mode" is set to "Power," electronic
signal transmission is synchronized with power status
of the main zone or Zone2.
When "Trigger Mode" is set to "Source," electronic
signal transmission is synchronized with input
switching in the main zone or Zone2.
Target Source
Specify the output level of the electronic signal transmitted with
each input switching.
Stops the electronic signal transmission when you
switch to the input source specified in this option.
Transmits the electronic signal when you switch to the
input source specified in this option.
This setting is available only when "Trigger Mode" is set to
"Source."
Manual
Manually switch the output level for electronic signal transmission.
This setting can also be used to confirm proper function of the
external component connected via the TRIGGER OUT jack.
This setting is available only when "Trigger Mode" is set to
"Manual."
Prohibits setting changes to prevent careless changes being made
to the settings on Setup menu.
Settings are not protected.
Prohibits changes to the settings on Setup menu until
it is returned to "Off."
While set to "On," the unit displays "Memory
Guard!" when an attempt is made to change the
settings.
Select the language used for display of menus and messages. "}2; _
Choices: English (English), Et:2g_= _ (Japanese), Franc;ais (French),
Deutsch (German), Espafiol (Spanish),
PyccKI41_ (Russian)
"{bJ _ : Content window informalion is displayed ill the language ill which lhat
inlk)rmation was released.
En
94