Yamaha RX-V667 Owner's Manual page 106

_ MAIN!ZONE2
@ Input selector
_SLEEP
RECEIVER (b
%
Controlling Ze#e2
The remote control can be used to select and control
Zone2 devices. The available operations are as follows:
• Selecting the input source of Zone2.
• Tuning into FM or AM when "TUNER" is selected as the
input source of Zone2.
• Tuning into SIRIUS Satellite Radio when "SIRIUS" is
selected as the input source of Zone2.
• Adjust the volume of Zone2 devices (when connected via
the built-in amplifier).
Aco_ va_ _sf_t_se Zone£ ope_at on
Set _IVIAIN/ZONE2
to ZONE2 before attempting to
use the remote control to control Zone2 devices.
Ope_st n!i}£Zone2
To switch between on and standby for Zone2
Press _RECEIVER IO.
To select an input source for Zone2
Press_mnput selector.
To enable the sleep timer for Zone2
Automatically switch the Zone2 device to standby mode
after a specified period of time has elapsed (sleep timer).
Press I8iSLEEP repeatedly to specify a time for the
sleep timer function.
iii II'¸ ......................... ,, 3;:¸
En
106