Yamaha RX-V667 Owner's Manual page 103

Swtch _sg the nput s®uce on ths
un_au_ema_ca ywhen s'£enng
_o TV sudo
When the HDMI Control (_) is operating
properly, the input source of this unit is automatically
changed to match operations carried out on the TV. The
default input jack is AV4. If the AV4 optical digital jack
is connected to the TV's audio output jack, then you can
enjoy TV sound through this unit right away.
Audio output
(Optical)
Optical digital audio output AV 1 or AV4 (Default)
Coaxial digital audio output av2 or AV3
Analog stereo output AVS, AV6, AUDIO 1, or AUDIO2
Available input jacks
_P_ Press _]Cursor q / > repeatedly to select
"HDMI" and press _]ENTER.
Make sure that "HDMI Control" is "On."
When "HDMI Control" is set to "Off." press
I_]ENTER and ![_J.]CursorA / v to set to "On."
_ON SCREEN
_Cur$or A/s7 / <_1_>
_1ENTER
'lb use other jacks to input audio signals from TV, carry
out the following procedure.
Connect this unit and the TV with an HDMI
cable.
Connect TV's audio output to this unit.
The input jacks listed below are available to input TV's
audio signals. Use the same jack type as used for the
TV.
@
4
Press _ON SCREEN. _,1
Press _]Cursor _ I _7 repeatedly to select
"Setup" and press _]ENTEFL
Press _Cursor v to select "TV Audio
Input" and press _]ENTEFL
Use _ilCursor _ / v to select the input jack
connected in step 2.
Press _ON SCREEN when you have
finished changing the settings.
If the TV hereafter transmitsaudio output signals, this
unit will automatically switch to the input source
chosen in step 7.
"i_j_ : Refer to the "Setting various functions (Setup menu)" (_ p. 83)
for details on the Setup menu.
En
103