Yamaha RX-V667 Owner's Manual page 30

Connectingan external ampl#ier
The same channel signals are output from the jacks of the PRE OUT terminals as from their
corresponding SPEAKERS terminals. When connecting an external power amplifier (pre-main
amplifier) to enhance speaker output, connect the input terminals of the power amplifier to the PRE
OUT terminals of this unit.
NOTE
When a component is connected to the PRE OUT terminals, do not connect speakers to the
SPEAKERS terminals corresponding to those PRE OUT terminals.
When the components are the Yamaha products and have the capability of the transmission of the
remote control signals, connect the REMOTE IN and REMOTE OUT jacks to the remote control input
and output jack with the monaural analog mini cable as follows.
Remote control out t
Infrared signal receiver or
Yamaha component
.emotecontro ,nL __ 1
Yamaha component
(CD or DVD player, etc.)
@ FRONT (PRE OUT) jacks
Front channel output jacks.
@ SURROUND (PRE OUT) jacks
Surround channel output jacks.
@
SUR. BACK (PRE OUT) jacks
Surround back output jacks. When you only connect one external amplifier for the surround back channel,
connect it to the SUR. BACK (SINGLE) jack.
@ SUBWOOFER (PRE OUT) 112jack
Connect a subwoofer with a built-in amplifier. When two subwoofers are connected, the same sound is
output from them.
@ CENTER (PRE OUT) jack
Center channel output jack.
• When a Yamaha component that supports the SCENE link playback function is connected via the
REMOTE OUT jack, playback begins automatically when the SCENE function is used (_).
• If the component connected to the REMOTE OUT jack is not a Yamaha product, set "SCENE IR" in the
SCENE menu to "OIF' (_).
ER