Yamaha RX-V667 Owner's Manual page 81

Reverberation level. Adjusts the volume of the reverberation
sound. The larger the value, the stronger the reverberation
becomes.
0to 100%
Source sound
d I
Rev. Level
Time
Selects a surround decoder to be used with a sound program in the
MOVIE category. _:;"_
Selects the Dolby Pro Logic lIx Movie (or
Dolby Pro Logic II Movie) decoder.
Selects the Neo:6 (Cinema) decoder.
Parameters usable [# ce#a[# se#ad
2ch Stereo only
Automatically bypasses the DSP circuit and tone control circuit
depending on the condition of tone control etc., when an analog
audio source is played back. You can enjoy a higher quality sound.
Outputs sound by bypassing the DSP circuit and tone
control circuit when both tone controls of "Bass" and
"Treble" are set to 0dB.
Does not bypass the DSP circuit and tone control
circuit.
7ch Stereo only
Adjusts the center channel volume. _5,2
Adjusts the volume of the surround L channel. _5,2
Adjusts the volume of the surround R channel. _5,2
:110
to 100c7_
Adjusts the volume of the surround back L channel. _5,2
0 to 100%
35% (7. l-channel configuration)
50% (6. l-channel configuration)
Adjusts the volume of the surround back R channel. _5,2
0 to 100_
35% (7. l-channel configuration)
50% (6. l-channel configuration)
Adjusts the volume of the front presence L channel. _5,2
0to
"ibj_ : Surround decoders canner be changed when used with the following MOVIE
sound programs.
• Mene Mevie
• Sports
• Action Game
• Releplaying Game
"{bJ 2 : Not displayed when speakers are sel to be inaclive.
En
81