Yamaha RX-V667 Owner's Manual page 88

i ii i'¸¸¸¸¸¸¸¸¸¸¸'¸¸
Setting the audio output function oi this
Sound Setup items
Adjusts the delay between video and audio output.
Selects the dynamic range adjustment method t%r
Dolby Digital and DTS playback.
Sets the maximum volume for this receiver.
Sets the initial volume for "a, h en this receiver is turned
on.
Adjusts the level of DSP effect in conjunction with the
volume level.
S nc_sro_s _: _sc_ a_,._d oiv dee eL_pu .... ....
Y ...... U
Adjusts the delay between audio and video output (Lipsync
function).
Mode
Selects a compensation method for the delay between audio and
video output.
When connecting to a TV via HDMI, automatically
adjusts output timing if the TV supports an automatic
lipsync flmction.
Manually adjusts the correction time. Select this when
the monitor does not support the automatic lipsync
flmction.
Delay
0 ms to +250 ms
0 ms
I nlS
Autoo, sdustng©o :}y©gts and©TS
dynamo ra_ ge
Selects the dynamic range adjustment method for audio bitstream
(Dolby Digital and DTS) signal playback.
Produces audio without adjusting the dynamic range.
Adjusts the dynamic range t%r optimum volume for
regular home use.
(MIN) Sets the dynamic range suitable t_r low
volume or a quiet environment, such as at night, for
bitstream signals except for Dolby TrneHD signals.
(AUTO) Adjusts the dynamic range t_r Dolby
TrneHD signals based on input signal information.
¢;;ett _}r_ the '_s8x '_%, '_ vo %,'_se
Specify tile maximum volume level so that sound is not too loud.
The default setting of +16.5 dB produces the highest volume.
-30.0 dB to +16.5 dB (maxinmm volume)
+16.5 dB
5.0 dB
En 88