Yamaha RX-V667 Owner's Manual page 25

[_ON SCREEN
[_ Cursor 5./v /<1/b,
_jE.TER
gonnect g BD/DVDplayers and other devices
This unit has the following input jacks. Connect them to the appropriate output jacks on
the playback devices such as BD/DVD players.
HDMI 1 HDMI HDMI
HDMI2 HDMI HDMI
HDMI3 HDMI HDMI
HDMI4 HDMI HDMI
HDMI5 HDMI HDMI
AV 1 Component video Optical digital
AV2 Component video Coaxial digital
AV3 Video Coaxial digital
AV4 Video Optical digital
AV5 Video Analog (Stereo)
AV6 Video Analog (Stereo)
AUD]OI Analog (Stereo)
AUDIO2 Analog (Stereo)
VIDEO AUX HDMI/Video HDMl/Analog (Stereo)
Connect the device with an HDMI cable to one of the HDMII-5 jacks. The HDMI IN
jack on the front panel can also be used.
Select the HDMI input (HDMI1-5 or VIDEO AUX) that the playback device is
connected to for playback.
HDMI output
BD/DVD player
• Receiving video signals from the HDMI lack and audio signals
from a jack other than HDMI
This unit can use me AV1-6 or AUDIO 1-2 input jacks to receive audio signals from
other input jacks.
For example, if a playback device c_not produce audio signals from an HDMI jack.
use the following method m change the audio input.
HDMI/Audio (Optical)
output
w
BD/DVD player
Press [_)!ON SCREEN to display the ON SCREEN menu.
@
Press [_i{]Cursor_ / V repeatedly to select "In put" and then press
{i) ENTER./_
Press l!-i]Cursor <1/ t> repeatedly to select the desired HDMI input
source and then press i_Cursor _.
Press Ii}]Cursor _7 repeatedly to select "Audio In," and then press
1_ENTER.
Press ]!)]Cursor _ / V to select the audio input source.
Once you have completed the setup, press [iSjON SCREEN to close
the menu.
"ibj _ : Refer
to the "Conliguring input sources (Input memO" (_ p. 72) for details on selecling the input source.
En
25