Yamaha RX-V667 Owner's Manual page 21

@We plugs and jacks
This unit is equipped with the following input/output jacks. Use jacks and cables appropriate for
components that you are going to connect.
Aud oiV dee iiscks
HDMI jacks
Digital video and digital sound are transmitted through a single jack.
Only use an HDMI cable.
VIDEO jacks
These jacks transmit conventional analog video
signals.
Use video pin cables.
Video pin cable
HDMI cable
• Use a 19-pin HDM[ cable with the HDM[ logo.
• We recommend using a cable less than 16.4 1i. (5.0 m) long to prevent signal quality degradation.
• When a TV that supports HDMI limctions and Audio Return Channel limction is connected, audio
output flom the TV can be input to this unit (_,'_.p. 1 04).
• When a player and TV that support the 3D video format are connected to this unit, 3D content can be
played back.
• If you connect this unit to a component that has a DVI jack, an HDMI/DVI-D cable is required.
Audo iiscks
OPTICAL jacks
These jacks transmit optical digital audio signals.
Use fiber-optic cables for optical digital audio
signals.
Digital audio fiber-optic cable
COAXIAL jacks
These jacks transmit coaxial digital audio signals.
Use pin cables for digital audio signals.
Digital audio pin cable
£_a09 vdeo iiacks
COMPONENT VIDEO jacks
The signal is separated into three components:
luminance (Y), chrominance blue (PB), and chrominance red (PR).
Use component video pin cables with three plugs.
Component video pin cable
AUDIO jacks
These jacks transmit conventional analog audio
signals.
Use stereo pin cables, connecting the red plug to
the red R jack, and the white plug to the white L
jack.
Stereo pin cable
En
21