Yamaha RX-V667 Owner's Manual page 97

@ HDMm2
NTV contreR keys
No
CODE SET
Default remote control code
The following remote control codes are assigned to input
sources as factory default settings. For a complete list of
available remote control codes, refer to "Remote Control
Code Search" in the CD-ROM.
HDMI1 Blu-ray player/ Yamaha 2064
recorder
HDMi2
HDMI3
HDMI4
HDMI5
AV1
AV2
AV3 CD player Yamah:t 5095
AV4
AV5
AV6
AUDIO1
AUDIO2
V-AUX
A
DOCK
TUNER
SIRIUS
Registering remote control codes
for external component operations
The following section describes how to register remote
control code using an example of the registration of the
remote control codes of a Yamaha BD player connected
to HDMI2 jack.
• Perform each of the following steps within 1 minute.
Settings will be automatically stopped if more than 1
minute passes since the last operation. To reset, repeat
fiom step 2.
• Remote control code of an external component cannot
be set fiom the name or model number era unit. Use
"Remote Control Code Search" in the CD-ROM to
search the available remote control codes fiom the
category or manufacturer of external components.
• If multiple remote control codes exist, first set the first
code in the list, if it does not work then tU the other
codes.
Use "Remote Control Code Search" in the CD-
ROM to search the available remote control
codes from the category or manufacturer of
external components.
"2064" can be used for a Yamaha BD player.
2
Press _CODE SET using a pointed object
such as the tip of a ballpoint pen.
blinks twice
@
Press @HD_vlt2 to switch the input source to
HDMI2. _5,2
Perform the following steps to register the selected
input source here to the remote control code.
"{bJ _ : Use A fnr external component operations only. Set these keys to
remote control codes if you want to perform external component
operations withnut linking to input source selection of this unit.
For example, it may be convenient to assign remote control codes
fnr devices such as TVs.
"{bJ 5 7 : When you want tn register a remnle cnnlrnl code In the
_]TV control keys, press N0) (NTV control keys) in step
3.
En
97