Yamaha RX-V667 Owner's Manual page 8

@ MAIN ZONE _ (MAIN ZONE Power)
Switches this unit between on and standby mode.
@
HDMI Through/iPod Charge indicator
Lights up in any of tile following cases while tile unit is in standby
mode.
• When the Standby Through lkmction is enabled and audio/video
from an external component connected with HDM[ is output to a TV
during standby mode (_).
• When an iPod/iPhone, which is placed in the Yamaha iPod universal
dock, is charging while the unit is in standby mode (_).
This indicator also lights up when the Ymnaha iPod wireless receiver
is connected to this unit (_).
@ YPAO MlCjack
Connect tile supplied YPAO microphone and adjust tile speaker balance
automatically (_).
@ ZONE2
When this unit is connected to an external amplifier located in another
room, this key switches that amplifier between on and standby
When speakers in another room are connected to this unit, this key
switches the built-in amplifier for those speakers on and off
@ ZONE CONTROL
Switches to Zone2 operation mode. This unit, or its remote control,
can be used to select input sources or adjust volume for an external
amplifier in another room or the built-in amplifier for speakers in
another room (_).
INFO
Changes the information displayed on the front panel display
@ MEMORY
Registers FM/AM stations as preset stations (_) or SIRIUS
channels as preset channels (_). "145
(_ PRESET<I>
Selects an FM/AM preset station (_) or a SIRIUS preset channel
(_ FM/AM (CATEGORY <:1 / E>)
Sets the FM/AM tuner band to FM or AM (_). "ib5 _
Selects a channel category for a SIRIUS (_).
@ Front panel display
Displays information on this unit (_).
@ TUNING/CH <</>>
Changes EM/AM tuner frequencies (_) or SIRIUS Satellite
Radio channels. "ibSt
@ PURE DIRECT
Switches this unit to Pure Direct mode (_).
@ PHONES jack
For plugging headphones in. Sound effects applied during playback
can also be heard through the headphones.
@ INPUT <I/E>
Selects an input source from which to playback. Press either tile left or
right key repeatedly to cycle through the input sources in order.
@ SCENE
Switches the input source and the sound program with a single button
(_). When this unit is in standby mode, press this key to switch
on,
@ TONE CONTROL
Adjusts high-frequency/low-frequency output of speakers/headphones
@
PROGRAM <:1 / E:>
Selects a sound program (_). Press tile left or right key
repeatedly to cycle through sound programs.
@ STRAIGHT
Changes a sound program to straight decoding mode (_).
@
VIDEO AUXjacks
For connecting game consoles to this unit temporarily (_).
Attach the supplied VIDEO AUX input cover when not using this jack
_) VOLUME
Adjusts the volume level.
"ibj_ : Usable when you have selecled TUNER or SIRIUS input.
En8