Yamaha RX-V667 Owner's Manual page 104

When using a TV that supports HDMI functions and
Audio Return Channel function, audio/video output
from this unit to the TV or audio output from the TV to
this unit can be transmitted through a single HDMI cable
(Audio Return Channel function). Audio signals
transmitted from the TV to this unit can be assigned to
any input source.
Connect this unit and the TV with an HDMI
cable.
TV
Video/ Audio m TV audio
output / output
_ Press [Cursor _ / _7repeatedly to select
_ "Setup" and press _IENTER.
Press [Cursor q / > repeatedly to select
"HDMI" and press _IENTER.
Press _Cursor _7to select "TV Audio
Input" and press _IENTER.
Press _iCursor _ / _ to select the input
source to which the HDMI audio signals will
be assigned, and press _iRETLIRN.
Press []Cursor _ to select "ARC (Audio
Return Channel)" and press _IEhlTER. _,?
Press _iCursor _ to select "On."
The Audio Return Channel function will turn on.
18
Press _ON SCREEN to close the Setup
menu.
If the TV hereafter transmits audio output signals,
this unit will automatically switch to the input
source chosen in step 6.
Make sure that "HDMI Control" is "On."
When "HDMI Control" is set to "Off," press
[ENTER and l_]Curser £x / V to set to "On."
_jON SCREEN
[Cursor/_/v/<_/>
[]ENTER
_i RETUF_N
2
Press _ON SCREEN. _,1
"@ 1 : Rellzr to the "Setting various functions (Setup menu)" (*>p. 83)
lot details on the Setup menu.
"{}J J ;? While the Audio Return Channel lhnction is on, the jack selected
for the input source cannot be used.
En
104