Yamaha RX-V667 Owner's Manual page 51

iiiiii[]i!iiJ ,¸ i ii i!i!
iiii!:! i}i!i!ii!i! iiii!i! si!ii_i_=, .....
I Au o-sd us_ ng 8se _,_c)u_'_w' '_d eve le rusk® ......
cress ow vo _.,__ses __s©[es_;,(F be
Input source: All input sources except MULTI CH
Adjusts the dynamic range in conjunction with the volume level
(from minimum to maximum). When you play audio at night or at
low volumes, it is a good idea to set parameter to "On." _5"/
..... ; Adjusts the dynamic range automatically.
!W_{_ : i/i/i/i/i/i/il l Does not adjust the dynamic range automatically.
II
When "On" is selected, the dynamic range is adjusted as follows.
If the volume level is low, the dynamic range is narrow.
If the volume level is high, the dynamic range is wide.
Off
Input Level
Volume: low
i/
Input Level
Volume: high
Input source: All input sources except MULTI CH
When CINEMA DSP 3D is enabled, set whether to use sound
programs in CINEMA DSP 3D mode (_).
,,,,,<> _ _.,," (] 8 O<,.i_ues
Input source: All input sources except MULTI CH
Adjusts the vertical position of center sound such as dialogues
when presence speakers are used. Increasing this parameter raises
the position.
ideal dialog
position
If the dialog seems to come out from a lower position than the
video monitor screen, increase this parameter.
tothe ideal
dialog position
"0" (default) corresponds to the lowest position and "5" to the
highest position.
• "Dialogue Lilt" can be adjusted only when the presence speakers
are available.
• You cannot move the dialog position lower than the del:ault
setting.
I Se ect ng _he 5,,S,,,cl anne _,_ _"_' _ s_ a p ayback
me,;hod
Input source: HDMII-5, AVI-4, V-AUX _2
Selects whether to reproduce 5.1-channel input signals in 6.1- or
7.1 -channel when surround back speakers are used.
Automatically selects the most suitable decoder if a
flag for reproducing surround hack channel is present,
and reproduces the signals in 6.1- or 7. l-channel.
Always reproduces signals in 7.1-channel using the
Dolhy Pro Logic llx Movie decoder whether or not
surround back channel signals are contained. You can
select this parameter when two surround back
speakers are connected.
Always reproduces signals in 6.1- or 7. l-channel
using the Dolby Pro Logic llx Music decoder whether
or not surround back channel signals are contained.
You can select this parameter when one or two
surround back speakers are connected.
Automatically selects the most suitable decoder for
input signals whether or not the flag for reproducing
surround back channel is present, and always
reproduces signals in 6. l-channel.
Always reproduces original channels whether or not
the flag for reproducing surround back channel is
present.
% "/ : "Adaplive DRC" is also effective when you use headplaones.
"{bJ 2 ', AV5-6 or AUDIO 1-2 are also available when "Audio Return Channel" is on,
and the input source is used tk_r"TV Audio lnpul."
En
51