Yamaha RX-V667 Owner's Manual page 93

Making the receiver easier to use
Function Setup items
This unit enters standby mode if no operations are
performed.
Specifies menu items displayed on TV screen and the
front panel.
Specifies TRIGGER OUT jack function.
Protects some settings against accidental
modification.
Goesene standby mode automa_ ca y
when you eave _kw _khou_ ope s_ n 9
If you do not operate this unit or use the remote control for an
extended period of time, it will automatically go into standby mode
(Auto Power Down function). This function's default setting is
"Off" When you want to enable this function, set the amount of
time to pass before this unit will enter standby.
Goes into standby mode, when you have not operated
this unit for four hours.
Goes into standby mode, when you have not operated
this unit for eight hours.
Goes into standby mode, when you have not operated
this unit for twelve hours.
Auto Power Down function is disabled.
This unit starts a countdown of 30 seconds before entering the
standby mode. Pressing any key of the remote control during the
countdown cancels entering the standby mode and reset the
timer.
Specify front panel display brightness and TV screen wall paper.
Front Panel Display
Specify front panel display brightness and message scroll pattern.
Adjustable range: -4 - 0
Reduce brightness of the front panel display. As the
value is lowered, the panel display darkens.
Selects the manner in which display scrolls when the
total number of characters exceeds the display area on
the front panel display.
Select "Continue" for continuous scrolling of all
characters.
Select "Once" to scroll through all characters once
and then halt scrolling for display of only the first 14
characters.
Wall Paper
Specify the wall paper displayed on the TV screen when no video
signal is input. Select one that you prefer.
Displays an image on the TV screen when there is no
video signal.
Displays a gray background on the TV screen when
there is no video signal.
En
93