Yamaha RX-V667 Owner's Manual page 35

[_ Cursor zx/v / <1/L>
_jE.TER
Displays the results of automatic
acoustics measurement. Refer to
"Reviewing and reloading automatic
setup parameters" for details (_).
Applies the result to the speaker setup and
finishes the automatic measurement.
Press _Cursor < I > to select "SAVE" and
press _IENTEFL
NOTE
If a problem occurs, an error message or report is
displayed either during or after acoustic measurement.
Refer to "When an error message is displayed during
measurement" (_), or "When a warning
message is displayed after measurement" (_) to
resolve the problem and measure acoustics with
YPAO again.
Press _Cursor z_I _" to select "Save/Exit"
and press _ENTEFL
Press _IENTEFL
YPAO is automatically terminated. Disconnect the
YPAO microphone.
The YPAO microphone is sensitive to heat. When you
have finished measuring, store the microphone out of
direct sunlight, and away from locations that may
experience high temperatures, such as on top of AV
equipment.
En
35