Yamaha RX-V667 Owner's Manual page 92

Specfy whe_he_ _ e__ so audesgns s
o(,_:p_,_t h_o_,ghths<nta u_ aTV
Choose whether audio is played back through this unit or through a
TV.
Amp
Specify whether or not audio signal is output through this unit.
Audio is not output through this unit.
Audio is output through this unit. When this setting is
selected, audio from the external component is output
in a tUrmat compatible with this unit.
OUT
Specify whether or not audio signal is output through a TV
connected via the HDMI OUT jack.
Audio is not output through a TV connected via the
HDMI OUT jack.
Outputs audio through a TV connected via the HDM!
OUT jack. When this setting is selected, audio from
the external component is output in a fornmt
compatible with the TV.
T_ans s_ _t usg H©S4_ aud _v de© _© !€heTV
dun 9 standby _sede {S_:andby T_wough}
This function allows audio/video signals from HDMI inputs to
continue to be transmitted to a TV when this unit is in standby
mode.
When the Standby Through function is "On2' audio/video signals
continue to be output to the TV from the last HDMI input source
before this unit enters standby mode. The HDMI input source can be
selected using @HDMH °5 or @V-AUX in standby mode.
Sets Standby Through to "Off."
Transmits audiolvideo signals from the selected
HDMI input source to the TV.
• When "HDMI Control" is "On," Standby Through function is
automatically enabled and "Standby Through" is not displayed.
• When the Standby Through function is on, the HDM[ Through/
iPod Charge indicator on the front panel lights during the standby
mode. This unit consumes approximately 3 W of powel:
Setting tUs un#'s multi-rune function
Multi Zone Setup item
i< q IAdjusts
Zone2 VO,l.l,ne ,eve,.
Max Volume
Specify the maximum volume level in Zone2 so that sound is not
too loud.
-30.0 dB to +16.5 dB (maxinmm volume)
+16.5 dB
5.0 dB
Initial Volume
Specify the initial volume level in Zone2 when this unit is turned on.
Off, Mute, -80 dB to +16.5 dB
Off
0.5 dB
En
92