Download Print this page

Yamaha RX-V667 Owner's Manual page 39

Hide thumbs Also See for RX-V667:

Advertisement

• Warning messages
The speakers
displayed
are connected
with the
opposite
polarity.
Depending
on the type of
speakers
you are using
and the environment
in
which you have them
installed,
this message
may occur even if the
speakers
are connected
correctly.
The speakers
displayed
are separated
from the
listening
position
by
more than 24 m, and
cannot be adjusted
correctly.
Vohnne level varies
greatly
t_r individual
channels,
and cannot be
adjusted
correctly.
Depending
on the type of
speakers,
"W-I"
may
display
even if the
speakers
are connected
correctly.
Check that the speaker
polarity
+ (positive),
and
- (negative)
are correct.
If
these are connected
correctly,
yon can use the
speakers
normally
even
this message
appears.
Install the speakers
with
24 m of the listening
point.
Check that all speakers
are installed
in the same
surroundings.
Check that the speaker
polarity
+ (positive),
and
- (negative)
are correct.
We recommend
the same
speakers
or speakers
with
as similar
specifications
as possible.
Adjust the volume of the
subwoofer.
If "W-2" or "W-3" appears, you can apply measurement results,
but they will not give optimal results. We recommend that you
resolve the problem and carry out the measurement process
again.
En
39

Advertisement

loading