Yamaha RX-V667 Owner's Manual page 95

A variety of information for this unit can be displayed.
_jON SCREEN
_] Cursor s./v /q/L>
_jENTER
Selecting information
Press DON SCREEN.
Use _Cursor A / v to select "Information"
and press _jENTER.
Use L_Cursor <1/ l> to select an Information
menu and press _IENTER.
Audo _sfo_xss_ on
Displays information on the current audio signal.
Signal format. When this unit is unable to
detect a digital signal, it automatically
switches to analog input.
The number of samples taken per second
from a continuous signal to make a
discrete signal.
The number of source channels in the
input signal (front/surround/LFE). For
example, a multi-channel soundtrack with
3 front channels, 2 surround channels and
LFE is displayed as "3/2/0.1".
The number of bits passing a given point
per second.
The dialogue normalization level preset
to the current input bitstream signal.
• .... is displayed when this unit cannot display the
corresponding information.
• Some high-definition audio bitstream contents may not
include the discrete surround back left and right
channel signals, but are encoded at a bitrate of 192
kHz.
• Even when direct bitstream output settings are applied,
some players convert the Dolby TrueHD or Dolby
Digital Plus bitstreams to the Dolby Digital bitstreams,
while converting DTS-HD Master Audio or DTS-HD
High Resolution Audio bitstreams to DTS bitstreams.
Vdeo nfo_ma_£ on
Displays information on the current video signal.
Source video signal type and video signal
output to this unit's HDMI OUT jack.
Input signal (analog or HDMI) and output
signal (HDMI) resolution.
Resolution of the source video signal and
the analog video signal output to this
unit's COMPONENT MONITOR OUT
Error message t%r HDMI sources or
connected HDMI devices (_).
Displays information on the TV screen connected to this
unit's HDMI OUT jack.
Displays iu%rmation on the current
connection interface.
Displays the frequency t%r each video
resolution of the TV currently connected.
Displays information on the current settings of "Remote
ID," "TV Format" and "Speaker Impedance."
Zone nfo_ma_£ on
Displays information on Zone2 settings.
En
95