Yamaha RX-V667 Owner's Manual page 36

[_ ENTER
_jRETuR.
_:_evewngand eeadn 9au_£ema_c
seup pa_ame_e_s
The results of automatic acoustics measurement can be
reviewed once measurement is complete. Automatic
setup parameters can also be reloaded if you are not
satisfied with manually configured speaker setup and
sound adjustments.
NOTE
When automatic setup parameters are reloaded,
manually configured settings are cleared. To save
manually configured settings before reloading
automatic setup parameters, see "Prohibiting setting
changes" (_).
Press _Cursor _ / _7repeatedly to select
"Result" and press _iENTER immediately
after the automatic measurement.
The "Result" menu can also be viewed from the
display shown after the YPAO microphone is
connected.
The results of acoustics measurement are displayed.
@ List of menu items
Menu items available in the Result menu are displayed.
@
Diagram
Shows the speaker setup and sound adjustment as diagram.
@ Message
Displays warning or error messages.
Select the desired menu item (or enable a
function) using _lCursor _ /_71q It>and
_IENTER.
_ Press _]RETURN to finish "Result" menu.
@
Displays the polarity of each connected
speaker.
"Normal" is displayed when the
polarity of the connected speaker is
nomml.
Displays the size of the connected
speakers.
"Large" is displayed when the
connected speaker has the ability to
reproduce the low-frequency signals
effectively.
"Small" is displayed when the
connected speaker does not have the
ability to reproduce the low-frequency
signals effectively.
Displays the distance from the listening
position to speakers. The unit tUr distance
can be switched between "fl" (feet) and
"m" (meter) by pressing _iCursor <1/ r>.
Displays the result of the adiustment of
each connected speaker output level.
Applies "Result" menu settings to this
unit.
The type of parametric equalizer can also be selected
from "PEQ Select" (_).
En
36