Yamaha RX-V667 Owner's Manual page 22

Connectinga TVmorn?or
This unit is equipped with the following three types of output jack for connection to a TV.
HDMI OUT, COMPONENT VIDEO or VIDEO. Select the proper connection according to the input
signal format supported by your TV.
COMPONENT VIDEO jacks
HDMI OUT jack (MONITOR OUT)
VIDEO jack
(MONITOR OUT)
When connecting to an HDMI compatible TV
Video signal such as component video and video received by this unit is converted to HDMI and output to
the TV. Just select HDMI input on the TV to view video from any external source connected to this unit. _/" _
Input Output
HDMI HDMI
#
#
#
#
VIDEO# #
--®
1
TV
HDMI input
Through
----.1>
Converted
When connecting to a non-HDMI compatible TV
Connect to the TV using the same type of connection that you used to connect to the external
component, and change the inputs on your TV to match that of the external component you are using
for playback. If the external component and TV are equipped with different types of analog video
jacks, this unit will convert the video signal to component video signal, or vice-versa, according to the
type of video input jacks used by the TV. "_/, _, "_/'3
Input Output
HDMI HDMI
COMPONENT COMPONENT
VIDEO VIDEO
!TV
Component
video input
-Video input
Through
mmmm,,_
Converted
"{55 "/ : You can change the resolution and aspect ratio when converting 1o HDMI 1o suit your requirements (_ p. 90).
"}5 2
Set "Analog to Analog Conversion" 1o "On" (_ p.89).
"{bJ _?: Analog to analog conversion is available only for 480i/576i-resolulion video signal.
En
22