Yamaha RX-V667 Owner's Manual page 91

_ece ve ope a_ o__ vs TV (H©_@I__",,_o_ _J_ _,_
Set the HDMI Control function to "On" to operate devices
connected via HDMI. If the TV or other external components
support HDMI Control (e.g., Panasonic VIERA Link), you can use
the remote controls of those devices to operate some of this unit's
functions, and to synchronize this unit with the operation of those
devices.
Refer to "Using the HDMI Control function" (_) for setting
instructions.
@iIISet M, Cont o, toO
If this unit is connected to HDMI devices that do not support the
HDMI Control function, these functions will not operate.
L s_:en ng to TV sudo va snge _,q ©_/f_
cabe (Audo Be_u_n Channe }
You can enable or disable the Audio Return Channel function.
When using a TV that supports Audio Return Channel function and
the function is enabled, the TV's audio output is transmit to this
unit via an HDMI cable.
The TV audio input to this unit is regarded as the input source
selected in "TV Audio Input." "_5, _?
By means of this function, you do not need to connect the TV's
audio output (digital audio output or analog audio output) to the
unit.
Sets the Audio Return Channel to "Off."
!,O}lli:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:i:;USetsthe Audio Return Channel to "On."
II
When the TV audio is input to the unit using Audio Return
Channel, "TV" is displayed on the front panel display.
Se ec_ n!£_an npu_ source _o sssgn sudo
_spu_ for _{:beTV
Select tile input source that receives audio signals from TV while
the HDMI Control function is on.
When using a TV that supports Audio Return Channel function and
the function is enabled, the audio input for the TV is assigned to
the input source selected here. "_52
Refer to "Switching the input source on this unit automatically
when listening to TV audio" (_>,p. 103) for instructions.
Refer to "Single HDMI cable input to TV audio with Audio
Return Channel function" (_) for setting instructions.
"@ _ : When the HDMI Control is "On," the Standby Through flmction is
automatically enabled. When this unit enters standby mode, the audio and
video signals from the last-selected HDMI input source will continue to be
transmitted to the TV. The HDMI input source can nnly be changed using the
remote control.
"{bJ 2 : While the Audio Return Channel funclion is on, the jack selected [k_rthe inpul
snurce canuot be used.
En
91