Press @Enter - Yamaha OWNER'S MANUAL HTR-6130 Owner's Manual

The "BASIC SETUP" feature is a useful way to set up your system quickly and with minimal effort.
• Make sure you disconnect your headphones from this unit.
• If you wish to configure this unit manually using more precise adjustments, use the detailed parameters ill "SOUND MENU"
(see page 45).
• Altering ally parameters ill "BASIC SETUP" resets all parameters manually adjusted ill "SOUND MENU" (see page 45).
• Initial settings are indicated ill bold under each parameter.
• Press @ RETURN on the remote control to return to the previous menu level.
1
Press @AMP on the remote control.
2 Press @MENU.
"BASIC SETUP" appears in the front panel display.
5 Press @V to select"SUBWOOFER" and then
@<1/I:> to select the desired setting.
:iii:L!iiii:i.,.!0(?F::EF:i: .... '.?E:iii:
3
:: i=:i'i2:: .i.L.. .Di=. LJr"
Press @ENTER to enter "BASIC SETUP".
"ROOM" appears in the front panel display.
"""'"""" :iii;i:ii i
i'::.E...i i ...ii" i := :' ":"
Choices: YES, NONE
• Select "YES" if you have a subwoofer in your
system.
• Select "NONE" if you do not have a subwoofer in
your system.
Press @V to select "SPEAKERS" and then
@<I / I:> to select the number of speakers
connected to this unit.
4
Press @<I / t> to select the desired setting.
Select the size of the room where you have installed
your speakers. In general, the room sizes are defined
as follows:
Choices: S, M, L
[U.S.A. and Canada models]
S (small) 16x 13 ft, 200 ft2 (4.8 x 4.0 m, 20 m2)
M (medium) 20 x 16 ft, 300 ft 2 (6.3 x 5.0 m, 30 m2)
L (large) 26 x 19 ft, 450 ft 2 (7.9 x 5.8 m, 45 m2)
[Other models]
S (small) 3.6 x 2.8 m, 10 m2
M (medium) 4.8 x 4.0 m, 20 m2
L (large) 6.3 x 5.0 m, 30 m2
,="i=:i="""," i .."i=" i=::=".... i:::: .... ,....i..
....: _ L.. F"; _".. L.. _"......: .... ,...: .=. F" r..
2spk
_ _ Front L/R
3 spk
_ _ :_' Front L/R, Center
4spk c_
sL iSR? Front L/R, Surround L/R
5spk _cR?
,ff gR, Front L/R, Center, Surround L/R
22
En