Transaction Report - Sharp AR-FX4 Operation Manual

Transaction Report

This report allows you to check the result of a transaction. The Transaction Report is printed out
automatically based on conditions set with the key operator program. (See page 145)
The following print conditions can be selected with the key operator program:
Transaction Report for normal transmissions
G
Print after every transmission
G
Print when an error occurs
G
Never print
Transaction Report for broadcast transmissions
G
Print after every broadcast transmission
G
Print only destinations to which transmission failed
G
Never print
Transaction Report for Receptions
G
Print after every reception
G
Print when an error occurs
G
Never print
Transaction Report for Confidential Receptions
G
Print after every confidential reception
G
Never print
Printing the original when a memory transmission error occurs
When a memory transmission error occurs, part of the original is printed below the Transaction Report
(except in the case of a confidential transmission). If desired, you can turn this function off with the key
operator program. (See page 146)
Example:
TX (MEMORY)
# DATE START TM
XXX XX/XX XX:XX
FOLLOWING DATA CAN NOT BE SENT
PLEASE HAND THIS TRANSACTION REPORT TO XXX
TRANSACTION REPORT
RECEIVER COM TIME
XXXXXXXXXXXXXXXXXXXXXXXXXX XX:XX:XX
PRINTING LISTS
MAY-11-2001 FRI 05:30 PM
PGS TYPE/NOTE
XXX XXX XXXXXXXXXXXXXXX
5
DEPT FILE
XX XXX
127