Sharp AR-FX4 Operation Manual page 96

F-CODE COMMUNICATION
Your machine initiates reception of a fax stored in the F-code memory polling box of another machine.
A timer setting can also be specified. (Timer Transmission: page 72)
Other
machine
Scan original into memory
1
Press the SPECIAL FUNCTION key, select "SENDING OPTIONS" with
the or
2
Press the
the OK key.
3
Enter the fax number of the other machine with the numeric keys, and
then press the OK key.
G
Only one fax number can be entered.
G
You can also use a rapid dialing, a Speed Dial number, or the REDIAL key.
4
Enter the sub-address (up to 20 digits) with the numeric keys and then
press the OK key.
G
Characters that can be entered are numbers, #,
character cannot be a space.
G
If you used a rapid dialing or Speed Dial number that has a sub-address programmed,
the sub-address is displayed.
G
To correct the sub-address, press the CLEAR key and re-enter it.
5
Enter the passcode (up to 20 digits) with the numeric keys and then
press the OK key.
G
Characters that can be entered are numbers, #,
character cannot be a space.
G
If you used a rapid dialing or Speed Dial number that has a passcode programmed, the
sub-address is displayed.
G
If a passcode is not required, press the OK key.
G
You do not need to enter a passcode if the other machine does not have one
programmed.
6 Press the START key.
92
Your
machine
Select F-code polling
F-code memory
polling box
To box
key, and then press the OK key.
or key to select "SUB ADD POLLING" and then press
Beep
Polling
Allows F-code polling
, and spaces. However, the initial
, and spaces. However, the initial
Reception
Transmission