Sharp AR-FX4 Operation Manual page 159

Telefax expansion kit
Table of Contents

Advertisement

2
Press the
3
Press the
and then press the OK key.
4
Press the
ACC. Name Print
When using Account Control, this setting determines whether or not the recipient is notified of the
sender's department name when a fax is sent. This setting is initially turned off (the recipient is not
notified).
1
Follow steps 1 through 4 of the initial procedure. (See page 143)
2
Press the
3
Press the
G
The setting is turned on and a checkmark appears in the checkbox in the message
screen.
G
This setting is only effective if Account Control is also turned on.
G
If this procedure is performed when the setting is turned on, the checkmark is cleared
and the setting turns off.
Recall Setting (Busy)
When you attempt to send a fax and the line of the receiving machine is busy, your machine will
automatically re-attempt the call. This setting is used to select the number of recall attempts that will be
made and the interval between attempts. The initial setting is 2 attempts and an interval of 3 minutes.
1
Follow steps 1 through 4 of the initial procedure. (See page 143)
2
Press the
3
Press the
G
If you do not wish to change the Recall Interval setting, proceed to step 6.
4
Press the
the OK key.
5
Enter the recall interval (01 to 15) with the numeric keys and then press the OK key.
G
The interval can be set to any number of minutes from 1 to 15.
G
If you do not wish to change the Recall Times setting, you can end the procedure.
6
Press the
OK key.
or
key to select "SENDING FUNCTION" and then press the OK key.
or
key to select "PRINT STATION # IN RCVD DATA"
or
key to select "OUT" or "IN DATA", and then press the OK key.
or
key to select "SENDING FUNCTION" and then press the OK key.
or
key to select "ACC. NAME PRINT" and then press the OK key.
or
key to select "SENDING FUNCTION" and then press the OK key.
or
key to select "RECALL SETTING (BUSY)" and then press the OK key.
or
key to select "RECALL INTERVAL" and then press
or
key to select "RECALL TIMES" and then press the
USING KEY OPERATOR PROGRAMS
155

Advertisement

Table of Contents
loading

Table of Contents