Sharp AR-FX4 Operation Manual page 52

STORING, EDITING, AND CLEARING AUTO DIAL KEYS AND NUMBERS
Storing rapid dial numbers and Speed Dial numbers
Storing a fax number in a rapid dialing allows you to dial that number by simply pressing the rapid key.
A total of 50 rapid dial numbers are available, including group keys.
Storing a fax number in a Speed Dial number allows you to dial that number by simply pressing the
SPEED key, entering a 3-digit number (000 to 299), and pressing the START key. A total of 300 Speed
Dial numbers are available.
1
Display the auto dial storing screen. (See steps 1 and 2 on previous
page)
2
Select "RAPID/SPEED" with the
3
Perform either of the following operations:
[Storing a rapid dialing]
G
Press the rapid key (01 to 50) that you wish to store.
[Storing a Speed Dial number]
G
Press the SPEED key and then enter the Speed Dial number (000 to 299) that you wish
to store with the numeric keys.
4 Enter the fax number of the destination with the numeric keys and
then press the OK key.
G
Up to 40 digits can be entered.
G
If you need to insert a pause between any of the digits, press the REDIAL/PAUSE key.
The pause appears as a hyphen (-). To set the duration of the pause, refer to page 147.
48
or key, and then press the OK key.