Changing The Transmission Mode; Sending A Fax By Auto Dialing - Sharp AR-FX4 Operation Manual

SENDING A FAX

Changing the Transmission Mode

This machine has two transmission modes: memory transmission mode and direct transmission mode.
To change modes, use the COMM. SETTING key.
1
Check the transmission mode, and then press the COMM. SETTING
key, select "TX", and press the OK key.
2
Press the
3
Press the OK key.
G
This completes the setting.

Sending a Fax by Auto Dialing

To use an auto dial number, the other party's fax number and name must be stored in the auto dial
number. (See page 47)
Sending a fax from the SPF
1 Insert the original in the document feeder tray. (See page 21)
G
Make sure an original does not remain on the platen glass.
G
Insert the originals face up.
G
Check and adjust the original size, resolution, and exposure settings as necessary.
32
or key to select the mode and then press the OK key.