Sharp AR-FX4 Operation Manual page 89

Adding or changing documents in memory
If there is already a document in memory when you scan a document for memory polling, a screen
appears after step 3 on the previous page that allows you to add the new document or replace the old
document with the new document.
1 Perform steps 1 through 3 of the procedure for scanning a document
into memory. (See previous page)
2 Perform either of the following operations, and then press the OK key.
Adding a document
(1) Press the
(2) Press the
Replacing the document
(1) Press the
(2) A message appears to confirm that you wish to clear the old document. Press the OK key.
(3) Press the
3
Press the START key.
G
Scanning begins.
G
If you are scanning from the platen glass and have another page to scan, change pages
and press the START key. Repeat until all pages are scanned, and then press the # key.
Printing documents stored for memory polling
1 Perform steps 1 through 3 of the procedure for scanning a document
into memory. (See previous page)
2 Press the
G
Printing begins automatically.
Clearing memory polling documents
1
Perform steps 1 through 3 of the procedure for scanning a document
into memory. (See previous page)
2
Press the
3
Press the
G
The documents are cleared from memory.
Note
G
When memory polling is use, the documents cannot be cleared.
or key to select "ADD" and then press the OK key.
or key to select "1 TIME" or "REPEAT" and then press the OK key.
or key to select "CHANGE" and then press the OK key.
or key to select "1 TIME" or "REPEAT" and then press the OK key.
or key to select "PRINT" and then press the OK key.
or key to select "DELETE" and then press the OK key.
or key to select "YES" and then press the OK key.
POLLING
3
85