Fcc Notice To Users - Sharp AR-FX4 Operation Manual

INTRODUCTION

FCC Notice to users:

This equipment complies with FCC rules, Part68. On this equipment is a label that contains, among other
information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. If
requested, this information must be provided to your telephone company.
The REN is used to determine the quantity of devices which may be connected to your telephone line
and still have all of those devices ring when your number is called. Too many devices on one line may
result in the devices not ringing in response to an incoming call. In most, but not all, areas the sum of the
RENs of all devices should not exceed five (5.0). To be certain of the number of devices that may be
connected to your line, as determined by the total REN, contact your local telephone company.
If this equipment cause harm to the telephone network, your telephone company may disconnect your
service temporarily. If possible, They will notify you in advance. If advance notice is not practical, you will
be notified as soon as possible. You will also be advised of your right to file a compliant with the FCC.
Your telephone company may make changes in its facilities, equipment, operations, or procedures that
could affect the operation of your equipment. If this happens, the telephone company will provide
advance notice in order for you to make necessary modifications to maintain uninterrupted service. If the
equipment is causing harm to the telephone network, your telephone company may ask you to
disconnect the equipment until the problem resolved.
If you have any questions or problems which cannot be solved by reading this manual, please contact
An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is
designed to be connected to the telephone network or premises wiring using a compatible modular jack
which is Part68 compliant. This equipment connects to the telephone network through a standard USOC
RJ-11C network interface jack.
When programming and/or making test calls to emergency numbers:
G
Remain on the line and briefly explain to the dispatcher the reason for the call.
G
Perform such activities in the off-peak hours, such as early morning or late evening.
ii
Sharp Electronics Corporation
P.O. Box 650
Mahwah, NJ 07430-2135
Telephone: 1-800-BE-SHARP