Checking The Status Of Stored Transmission Jobs (Transmission Reserve Status) - Sharp AR-FX4 Operation Manual

JOB/FUNCTION CHECK
Checking the Status of Stored Transmission Jobs
(Transmission Reserve status)
You can check the status of stored transmission jobs (jobs scanned into memory and waiting to be
sent, jobs in recall mode, etc.).
After checking a job, you can also cancel it.
G
Up to 50 transmission jobs can be stored, including memory transmission jobs, timer transmission
jobs, and jobs in recall mode.
G
The display simply shows the general status of transmission jobs and the order of transmission. For
more detailed information, print the timer list. (See page 123)
G
The following information is shown. If no jobs are stored, "NONE" appears.
Item displayed
Waiting
Recall
Destination name
Transmission method
Number of original
pages scanned
Document control
number
Time setting
Timer transmission
control number
Number of jobs stored
Recall times
Control numbers
A document control number (3 digits) and time specification control number (2 digits) are automatically
assigned to transmission jobs when stored. The control numbers are shown in the stored transmission
job message display and the timer list.
Document control numbers are only assigned to memory transmissions.
Time specification control numbers are assigned to transmissions with a timer setting.
Checking transmission job status
1
Press the JOB STATUS key.
2 Select "TX/RX RESERVE" with the
key.
3
Press the
G
If more than one job is stored, you will scroll through the jobs one at a time as you press
the or
G
When you are finished, press the CLEAR ALL key to exit.
116
Jobs not yet sent such as stored memory transmission jobs and timer
transmission jobs.
Transmission was attempted but the job went into recall mode.
Name and fax number of destination
Refer to "transmission job status".
Number of pages to be sent
Control number assigned to memory transmission jobs
Time specified for a timer transmission (shows "Prepared" for jobs other
than timer transmissions and recall mode jobs)
Control number assigned to timer transmissions
Number of jobs stored / total number of jobs stored
Number of recall jobs / total number of jobs stored (only when in recall mode)
or key to display the job you wish to check.
key.
Information displayed
or key and then press the OK