Sharp AR-FX4 Operation Manual page 170

USING KEY OPERATOR PROGRAMS
Notes
G
If you made a mistake in steps 7 or 8, move the cursor to the mistake with the
enter the correct number.
G
To clear a confidential box, follow these steps:
(1) Select "DELETE" in step 4 and then press the OK key.
(2) Press the
then press the OK key.
(3) Press the
Sub-Address Confidential Code Set
This setting is used to program a memory box to be used for sub-address confidential reception. A sub-
address and passcode for sub-address confidential reception and a print passcode to print out received
faxes are programmed for each box. Up to 10 boxes can be programmed. You can check a programmed
box in the "SUB ADD SET LIST". (See page 144)
1 Follow steps 1 through 4 of the initial procedure. (See page 143)
2
Press the
3
Press the
and then press the OK key.
4
Press the
5
Press the
confidential box that you wish to program, and then press the OK key.
6
Enter a name for the box (up to 36 characters) and then press the OK key.
G
To enter characters, see "ENTERING CHARACTERS" on page 63.
7
Program a sub-address and passcode. (See steps 2 and 3 pages 52, 53)
G
Numbers from 0 to 9 can be entered for the sub-address. Numbers from 0 to 9, as well as
"#" and "
G
If you make a mistake, press the CLEAR key and then re-enter the correct number.
8 Enter a print passcode (0000 to 9999) with the numeric keys, and then
press the OK key.
G
If you made a mistake, move the cursor to the mistake with the
correct number.
Note
G
To clear a sub-address confidential box, follow these steps:
(1) Select "DELETE" in step 4 and then press the OK key.
(2) Press the
to clear, and then press the OK key.
(3) Press the
166
or key to select the name of the confidential box that you wish to clear, and
or key to select "DELETE" and then press the OK key.
or key to select "SPECIAL FUNCTION" and then press the OK key.
or key to select "SUB ADDRESS CONF. CODE SET"
or key to select "NEW REGISTRATION" and then press the OK key.
or key to highlight the unused sub-address
", can be entered for the passcode.
or key to select the name of the sub-address confidential box that you wish
or key to select "DELETE" and then press the OK key.
keys and
keys and enter the