Dual Access - Sharp AR-FX4 Operation Manual

DUAL ACCESS

This function is used to store a transmission job while fax reception or memory transmission is in
progress. When the previous job is completed, the stored job is automatically performed. The
procedure for storing a transmission job is the same as for performing a regular transmission.
A stored job can be checked or canceled in the job status screen (See page 114).
Your
machine
Transmission/reception
in progress
Other
machine
The following transmission operations can be stored:
(1) Normal transmission (See page 28)
(2) Broadcast transmission (See page 70)
(3) Confidential transmission (See page 74)
(4) Relay request transmission (See page 77)
(5) Polling (See page 81)
G
This function can be used during memory transmission (See page 31) or reception (See page 41).
Note that the Quick On-Line function does not operate.
G
This function cannot be used during a copy job or during direct transmission.
Current job ends
Store transmission job
(6) Serial polling (See page 81)
(7) F-code transmission (See page 87)
(8) F-code polling (See page 91)
(9) Timer transmission (See page 72)
Stored job begins
99
3