Configuration Report And Test Page - Sharp AL-1640 Service Manual

AL-1670
A. Main Menu
Possible
Item
Settings
1 ∼ 999
Copies Sets how many copies to print.
600dpi ∗
Resolution Sets the printing resolution.
300dpi
Sets whether smoothing is done or not.
This function improves the appearance
of printed documents by smoothing the
angles and curves of images. This
allows printing at a higher apparent
On ∗
Smoothing resolution. For example, if the printer is
Off
set to 600dpi, resolution equivalent to
1200dpi can be achieved.
When printing image data, you may
need to select "Off" to achieve best
results.
Sets whether toner save mode is in
effect or not. This function prints slightly
On
Toner Save fainter to save toner. This item is
Off ∗
different from the copier "toner save
mode".
Sets the tray used for paper feeding.
Setting to "Auto" automatically selects
Auto ∗
the paper tray loaded with the paper of
Tray 1
Paper
the size specified in the "Paper Size"
Source Tray 2∗
item.
Bypass Tray
∗ The available settings reflect the
installed trays.
A3
B4
A4∗
B5
Sets the size of the paper where data
A5
will be printed. If this size is different
Ledger
from the paper size present in the tray,
Legal
the size set on the operation panel takes
Paper Size Letter∗
precedence.
Executive
∗ Depending on where the printer was
Folio
purchased, the default value is either A4
Invoice
or Letter.
Foolscap
COM-10
DL
C5
Sets the page orientation for printing.
Specify "Portrait" to print the paper with
Portrait ∗
Orientation its long side (longer edge) vertical.
Landscape
Specify "Landscape" to print the paper
with its long side (longer edge) horizontal.
PCL ∗
Emulation Specifies the printer language used.
HEX
C. Interface Menu
Item Setting Choice
1 second
60 second ∗
I/O Time Out
999 second
D. Test Menu
Item
Configuration Page
PCL Font List
Description
Description
Sets I/O time-out. If
: no data is received
within the preset
: time, print
processing is ended.
Description
Prints the configuration page.
Prints the PCL6 font list.
[10] CONFIGURATION REPORT
AND TEST PAGE
To test print the configuration page and font list, use the following
procedure:
1) Press the ON LINE key to switch the printer to the offline mode.
DATA
ON LINE
2) Press the MENU key to display the Test Menu.
ON LINE
3) Press the ITEM key to display the required item.
ON LINE
4) Press the ENTER key.
The test page prints.
DATA
NE MENU ITEM
9 – 2
MENU ITEM ENTER
DATA
MENU ITEM ENT
DATA
MENU ITEM ENT
ENTER