Sstk Boot Image; Sstk Repository; The Deployment Process - HP BL860c Administrator's Manual

Figure 1 Simple SSTK Deployment Scenario

SSTK repository

(Workstation)
You use a workstation to unpack the toolkit, edit the configuration files, and set up the boot
mechanism. The workstation typically hosts the SSTK repository, which holds the configuration files,
scripts, utilities, and Windows installation files.
Each time the target server loads the SSTK boot image, the repository is shared and the SSTK
performs a preconfigured action. Sample actions include saving the server configuration
(ReadHWConf), replicating a saved configuration (ApplyHWConf), applying RAID1 configuration
to a LSI SAS 1068 Controller ApplySASConf, and installing Windows (Deploy), or showing a
command prompt in order to run the SSTK utilities manually (CommandPrompt).

SSTK boot image

The SSTK boot image is based on the Windows Pre-installation Environment (Windows PE). Windows
PE is a subset of the Windows 2008 Kernel and provides operating system features for the toolkit.
For more information, see the Windows PE User's Guide in the Windows Automated Installation
Kit (AIK).
The SSTK provides a script to create a customized boot image using AIK tools. This is described
in Chapter 2 (page
SSTK repository
Every server that boots to the SSTK environment must have access to the repository of configuration
files, scripts, utilities, OS files, driver files, and application files. If you host the repository on the
workstation, it must be accessible to the Integrity servers being deployed.
IMPORTANT:
repository on a boot device (a local disk on the Integrity server or a USB device). The repository
must have write permission in order to save SSTK log and data files.

The deployment process

The deployment process consists of the following steps:
1. Extract the SSTK software package.
2. Create an SSTK boot image.
3. Configure an SSTK action.
4. Boot the target server and monitor the deployment using the SSTK log system or Integrated
Lights-Out (iLO) interface.
CommandPrompt
ReadHWConf
ApplyHWConf,
ApplySASConf and Deploy
12).
A repository solution is not limited to the previous example. You can host the
SSTK boot image
(Target Server)
The deployment process 7