Table of Contents
Advertisement
Network Tools
Screen Example
Figure 12-1 Network Tools Help Screen
The Network Tools functions are performed using a series of commands. Entering commands in
Network Tools involves typing the command to be executed at the Network Tools prompt, adding
any desired or required extensions, and pressing ENTER.
There are two categories of commands in the command set: Built-in and Special, which are
described below and detailed in
•
Built-in Commands – Allow you to access and manage network devices.
NOTE: The atm_stp_state command only displays when an HSIM or VHSIM is installed
that supports ATM, such as the HSIM-A6DP or VHSIM2-A6DP.
12-2
Network Tools Screens
Sections 12.2
and 12.5.
Advertisement
Table of Contents
