Enterasys 6E2xx Local Management User’s Manual page 132

Matrix e7 series and smartswitch 6000 series modules
Table of Contents

Advertisement

General Configuration Screen
Table 5-2 General Configuration Screen Field Descriptions (Continued)
Use this field...
Screen Refresh
Time
(Modifiable)
Screen Lockout
Time
(Modifiable)
Module Uptime
(Read-Only)
Operational Mode
(Read-Only)
Management Mode
(Toggle)
5-6
Module Configuration Menu Screens
To...
Enter a new update time. This setting determines how frequently (in
seconds) information is updated on the screen. To enter the refresh
time, refer to
Section
Enter a new lockout time. This is maximum number of minutes that the
Local Management application displays a screen while awaiting input
or action from a user. For example, if the number 5 is entered in this
field, the user has up to five minutes to respond to each of the specified
module's Local Management screens.
In this example, after five minutes of no input or action, the terminal
"beeps" five times, the Local Management application terminates the
session, and the display returns to the Local Management Password
screen.
To enter the screen lockout time, refer to
See the total time that the module has been operating.
Display "802.1Q SWITCHING" and cannot be changed.
Set the switch module to operate in either DISTRIBUTED or
STANDALONE management mode. DISTRIBUTED mode is the
default setting.
NOTE: This field is only available when the switch module is
installed in a 6C105 chassis.
It is recommended that you set all modules in the chassis to
either DISTRIBUTED or STANDALONE management mode.
When this field is set to DISTRIBUTED management mode, you can
access all modules in the chassis using only one IP address set using
the Chassis Configuration screen described in
DISTRIBUTED management mode also allows you to use the COM
port on any of the switches set to the DISTRIBUTED management
mode to access the Local Management of each switch module.
In STANDALONE management mode, the switch can be configured
with its own IP address and operate as an independent switch within
the chassis.
5.2.8.
Section
5.2.9.
Section
4.2. The

Advertisement

Table of Contents
loading

Table of Contents