Enterasys 6E2xx Local Management User’s Manual page 362

Built-in Commands
soft_reset
Description:
Syntax:
Options:
Example:
stpEdgePort
Description:
Syntax:
Options:
Example:
12-28 Network Tools Screens
Restarts the software image, which restores the user configuration settings
from NVRAM. The user will be queried to confirm the reset command to
ensure against unwanted resets.
TIP: The Network Tools connection to the device will be terminated
upon execution of this command.
soft_reset
None
->soft_reset
RESET: Are you *SURE* ?
-> Y
Sets a port to EDGE PORT (enable) or BRIDGE PORT (disable).
stpEdgePort [ status ]
stpEdgePort [ enable ] [ vlan id ] [ port range ]
stpEdgePort [ disable ] [ vlan id ] [ port range ]
stpEdgePort enable
stpEdgePort disable
stpEdgePort status
To enable EdgePort on VLAN 1, port 5:
-> stpEdgePort enable 1 5
To enable EdgePort on VLAN ports 5-10:
-> stpEdgePort enable 1 5-10