Hsim/Vhsim Configuration Screen - Enterasys 6E2xx Local Management User’s Manual

6.4

HSIM/VHSIM CONFIGURATION SCREEN

When to Use
To configure an optional HSIM or VHSIM.
NOTE: The HSIM/VHSIM Configuration menu item can only be selected when a
non-Ethernet HSIM or VHSIM is installed in the switch module. The applicable setup
screen for that interface displays. This only applies to HSIMs and VHSIMs that can
support WAN, FDDI or ATM. Refer to the appropriate HSIM or VHSIM user's guide to set
its operating parameters.
How to Access
Use the arrow keys to highlight the HSIM/VHSIM CONFIGURATION menu item on the Port
Configuration Menu screen and press ENTER. The applicable HSIM or VHSIM setup screen
displays. Refer to the appropriate HSIM or VHSIM user's guide for instructions on using the Local
Management screens for that interface.
HSIM/VHSIM Configuration Screen
Port Configuration Menu Screens 6-13