Walkthrough Stage Two, Port 3 Egress Setting - Enterasys 6E2xx Local Management User’s Manual

Quick VLAN Walkthrough
4. Use the arrow keys to highlight the SAVE command at the bottom of the screen. Press ENTER.
Port 3 is added to the Egress list of VLAN 2 with a frame format of UNTAGGED. The screen
should now look like
Figure 13-7 Walkthrough Stage Two, Port 3 Egress Setting
Now that Port 3 belongs to VLAN 2, we will designate one port as a trunk port for a connection to
another VLAN-aware switch. This trunk port will carry tagged frames from all VLANs, allowing
VLAN frames to maintain their VLAN ID across multiple switches.
NOTE: For the purposes of this walkthrough, port 10 will be configured as the trunk
port.
5. Use the arrow keys to highlight the Egress field for port 10 in the Static VLAN Egress
Configuration screen.
6. Use the SPACE bar to step to TAGGED.
7. Use the arrow keys to highlight the SAVE command at the bottom of the screen. Press ENTER.
Port 10 will now serve as a trunk port connection. The screen should now look like
13-18 VLAN Operation and Network Applications
Figure 13-7.
Figure 13-8.