Enterasys 6E2xx Local Management User’s Manual page 356

Built-in Commands
radius (Continued)
Options:
(Cont'd)
Example:
12-22 Network Tools Screens
radius prim_secret
Sets the primary Radius server's shared secret.
radius sec_secret
Sets the secondary Radius server's shared secret.
NOTES: The secret is NOT encrypted in transit; if this command is
used over TELNET then the secret may be compromised.
For maximum security, it is recommend to use a 16 to 32 character
string for the shared secret code. For security reasons, the entered
code appears as asterisks (*) on the screen.
-> radius client
RADIUS Configuration Cli
Command Format : radius
status
clear
timeout
last_resort
retry
enable
disable
prim_secret
prim_ip
prim_auth_port
prim_acct_port
sec_secret
sec_ip
sec_auth_port
sec_acct_port
->
(shows Radius status)
(clears all entries)
(server timeout, seconds)
<local|remote> <accept|reject|challenge>
<number of retry attempts>
(enables radius client)
(disables radius client)
(sets primary secret)
<primary server IP>
<primary server authentication port>
<primary server acct port>
(sets secondary secret)
<secondary server IP>
<secondary server authentication port>
<secondary server acct port>