Table of Contents
Advertisement
arp_learn
Description:
Used to set (normal or limited) how the ARP cache entry will be affected
under different conditions as described in Options below. The command can
also be used to display its current setting.
Syntax:
arp_learn [normal | limited | status]
Options:
normal – Changes the ARP cache entry for a given IP Address, if the source
limited – Causes the ARP entry to change only by ARP request and ARP
status – Displays the current status information about ARP Cache.
Example:
-> arp_learn status
Current ARP Cache Learn status: NORMAL
-> arp_learn limited
Setting ARP Cache Learning to LIMITED.
!! Don't forget to set a Default Gateway !!
-> arp_learn normal
Setting ARP Cache Learning to NORMAL.
bridge
Description:
Allows the bridge interface to be enabled or disabled at the user's request,
either one at a time or all at once. Specifying a single interface number will
affect the bridging status of that interface, while specifying ALL will affect
every interface.
Syntax:
bridge [ENABLE/DISABLE] [IFNUM/ALL]
Options:
None
Example:
-> bridge disable all
-> bridge enable 1
-> bridge disable 1
address (SA) in the entry does not match that of any received IP Packet.
response packets. Other IP packets will be ignored.
Built-in Commands
Network Tools Screens
12-7
Advertisement
Table of Contents
