Snmp Traps Configuration Screen - Enterasys 6E2xx Local Management User’s Manual

5.5

SNMP TRAPS CONFIGURATION SCREEN

When to Use
To assign SNMP traps to eight different IP addresses. Since the switch module is an SNMP
compliant module, it can send messages to multiple Network Management Stations to alert users
of status changes.
NOTE: It is only necessary to assign SNMP traps when the user needs the traps sent
to different addresses than those assigned for the chassis. Refer to
details how to set SNMP Traps for the 6C105 chassis.
How to Access
Use the arrow keys to highlight the SNMP TRAPS CONFIGURATION menu item on the
SNMP Configuration Menu screen, and press ENTER. The SNMP Traps Configuration screen,
Figure 5-9, displays.
Screen Example
Figure 5-9 SNMP Traps Configuration Screen
SNMP Traps Configuration Screen
Module Configuration Menu Screens
Section 4.4, which
5-23