Table of Contents
Advertisement
NOTE: If the terminal is idle for several minutes, the Local Management Password
screen redisplays and the session ends. This idle time can be changed in the Chassis
Configuration screen described in
Menu Descriptions
Refer to
Table 3-3
for a functional description of each menu item.
Table 3-3 Module Menu Screen Menu Item Descriptions
Menu Item
MODULE
CONFIGURATION
MODULE
STATISTICS
NETWORK
TOOLS
Section
Screen Function
Provides access to the Local Management screens that are used to
configure the switch module and also provides access to the Port
Configuration Menu screen, 802.1 Configuration Menu screens, and
the Layer 3 Extensions Menu screens.
The Port Configuration Menu screen provides access to the screens that
are used to set operating parameters specific to each port.
The 802.1 Configuration Menu screen provides access to the Spanning
Tree Configuration Menu screen, 802.1Q VLAN Configuration Menu
screen, and the 802.1p Configuration Menu screen. These screens are
used to set the basic switch operations, and provide access to screens to
configure VLANs, and assign port priorities.
For details about the screens, refer to:
•
Chapter 5
for the Module Configuration Menu screen,
•
Chapter 6
for the Port Configuration Menu screen,
•
Chapter 7
for the 802.1 Configuration Menu screen, and
•
Chapter 10
for the Layer 3 Extensions Menu screen.
Provides access to screens used to obtain statistics and performance
information for the switch module. For details, refer to
The Network Tools function resides on the switch module and consists
of commands that allow the user to access and manage network
devices, including the ability to Telnet to other devices.
explains how to use the Network Tools utility.
4.2.
Accessing Local Management
Module Menu Screen
Chapter
11.
Chapter 12
3-13
Advertisement
Table of Contents
